AudioProc represents a high-quality, linear-phase multiband audio dynamics processor for Winamp, utilizing 10-band compression / expansion / limiting technology that emulates expensive professional broadcast hardware. Intended to achieve a competitive 'on the air' sound signature resembling that of modern audio broadcast processors used by major market FM radio stations, AudioProc will normalize the volume and spectral balance of played material to provide a consistent listening experience that is warm and bright, non-fatiguing, properly balanced and artifact-free. Suitable for PC-based music playback, Server-based music playout system for home or commercial use, Netcasting and Low-power AM/FM transmissions.
Audio Proc Broadcast Audio Processor Keygen Software
This software offers features like recording without audio, microphone recording, video quality settings, and more. As it is compatible with DirectX technology, you can capture videos from DirectX-supported video cards such as Nvidia GeForce GTX 650 Ti Boost or AMD R9 270X card.
Here is my debug prints while playing audio and I attached dmesg and driver c file debug.txt [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034][ 0.000000] Linux version 5.4.70+gfd7f722f444d (iwave@iwave) (gcc version 9.2.0 (GCC)) #28 SMP PREEMPT Fri Jan 21 14:51:52 IST 2022[ 0.000000] Machine model: iW-G39H-i.MX8MM-SODIMM-2GB[ 0.000000] efi: Getting EFI parameters from FDT:[ 0.000000] efi: UEFI not found.[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000058000000, size 640 MiB[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b8000000, size 0 MiB[ 0.000000] OF: reserved mem: initialized node vdev0vring0@b8000000, compatible id shared-dma-pool[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b8008000, size 0 MiB[ 0.000000] OF: reserved mem: initialized node vdev0vring1@b8008000, compatible id shared-dma-pool[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b8400000, size 1 MiB[ 0.000000] OF: reserved mem: initialized node vdevbuffer@b8400000, compatible id shared-dma-pool[ 0.000000] NUMA: No NUMA configuration found[ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff][ 0.000000] NUMA: NODE_DATA [mem 0xbfbcd500-0xbfbcefff][ 0.000000] Zone ranges:[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000bfffffff][ 0.000000] Normal empty[ 0.000000] Movable zone start for each node[ 0.000000] Early memory node ranges[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff][ 0.000000] node 0: [mem 0x0000000081000000-0x00000000b7ffffff][ 0.000000] node 0: [mem 0x00000000b8010000-0x00000000b80fefff][ 0.000000] node 0: [mem 0x00000000b8100000-0x00000000b83fffff][ 0.000000] node 0: [mem 0x00000000b8500000-0x00000000bfffffff][ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff][ 0.000000] On node 0 totalpages: 519919[ 0.000000] DMA32 zone: 8192 pages used for memmap[ 0.000000] DMA32 zone: 0 pages reserved[ 0.000000] DMA32 zone: 519919 pages, LIFO batch:63[ 0.000000] psci: probing for conduit method from DT.[ 0.000000] psci: PSCIv1.1 detected in firmware.[ 0.000000] psci: Using standard PSCI v0.2 function IDs[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.[ 0.000000] psci: SMC Calling Convention v1.1[ 0.000000] percpu: Embedded 24 pages/cpu s58904 r8192 d31208 u98304[ 0.000000] pcpu-alloc: s58904 r8192 d31208 u98304 alloc=24*4096[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0[ 0.000000] CPU features: detected: ARM erratum 845719[ 0.000000] CPU features: detected: GIC system register CPU interface[ 0.000000] Speculative Store Bypass Disable mitigation not required[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 511727[ 0.000000] Policy zone: DMA32[ 0.000000] Kernel command line: console=ttymxc3,115200 root=/dev/mmcblk0p2 rootwait rw[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off[ 0.000000] Memory: 1354988K/2079676K available (16764K kernel code, 1282K rwdata, 6688K rodata, 2880K init, 1015K bss, 69328K reserved, 655360K cma-reserved)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1[ 0.000000] rcu: Preemptible hierarchical RCU implementation.[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.[ 0.000000] Tasks RCU enabled.[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode[ 0.000000] GICv3: 128 SPIs implemented[ 0.000000] GICv3: 0 Extended SPIs implemented[ 0.000000] GICv3: Distributor has no Range Selector support[ 0.000000] GICv3: 16 PPIs implemented[ 0.000000] GICv3: no VLPI support, no direct LPI support[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000[ 0.000000] ITS: No ITS available, not enabling LPIs[ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x44c with crng_init=0[ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys).[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns[ 0.000003] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns[ 0.000396] Console: colour dummy device 80x25[ 0.000465] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000)[ 0.000474] pid_max: default: 32768 minimum: 301[ 0.000545] LSM: Security Framework initializing[ 0.000597] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)[ 0.000608] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)[ 0.001737] ASID allocator initialised with 32768 entries[ 0.001809] rcu: Hierarchical SRCU implementation.[ 0.002772] EFI services will not be available.[ 0.002930] smp: Bringing up secondary CPUs ...[ 0.003282] Detected VIPT I-cache on CPU1[ 0.003305] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000[ 0.003338] CPU1: Booted secondary processor 0x0000000001 [0x410fd034][ 0.003727] Detected VIPT I-cache on CPU2[ 0.003744] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000[ 0.003761] CPU2: Booted secondary processor 0x0000000002 [0x410fd034][ 0.004185] Detected VIPT I-cache on CPU3[ 0.004202] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000[ 0.004218] CPU3: Booted secondary processor 0x0000000003 [0x410fd034][ 0.004269] smp: Brought up 1 node, 4 CPUs[ 0.004278] SMP: Total of 4 processors activated.[ 0.004284] CPU features: detected: 32-bit EL0 Support[ 0.004291] CPU features: detected: CRC32 instructions[ 0.010901] CPU: All CPU(s) started at EL2[ 0.010920] alternatives: patching kernel code[ 0.012138] devtmpfs: initialized[ 0.019365] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns[ 0.019385] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)[ 0.037004] pinctrl core: initialized pinctrl subsystem[ 0.037738] DMI not present or invalid.[ 0.037983] NET: Registered protocol family 16[ 0.045322] DMA: preallocated 256 KiB pool for atomic allocations[ 0.045352] audit: initializing netlink subsys (disabled)[ 0.045593] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1[ 0.046443] cpuidle: using governor menu[ 0.046911] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.[ 0.047711] Serial: AMBA PL011 UART driver[ 0.047766] imx mu driver is registered.[ 0.047786] imx rpmsg driver is registered.[ 0.052668] imx8mm-pinctrl 30330000.pinctrl: Invalid fsl,pins or pins property in node /soc@0/bus@30000000/pinctrl@30330000/imx8mm-iwg34m/usb1grp[ 0.052683] imx8mm-pinctrl 30330000.pinctrl: Invalid fsl,pins or pins property in node /soc@0/bus@30000000/pinctrl@30330000/imx8mm-iwg34m/carrier_rst[ 0.052707] imx8mm-pinctrl 30330000.pinctrl: Invalid fsl,pins or pins property in node /soc@0/bus@30000000/pinctrl@30330000/imx8mm-iwg34m/pwr_grp[ 0.052746] imx8mm-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver[ 0.076965] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages[ 0.076976] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages[ 0.076982] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages[ 0.076989] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages[ 0.077817] cryptd: max_cpu_qlen set to 1000[ 0.085219] iw_em05_gpio em05_gpios: gpios DT property empty / missing[ 0.085693] ACPI: Interpreter disabled.[ 0.087084] iommu: Default domain type: Translated [ 0.087237] vgaarb: loaded[ 0.087534] SCSI subsystem initialized[ 0.087675] libata version 3.00 loaded.[ 0.087889] usbcore: registered new interface driver usbfs[ 0.087925] usbcore: registered new interface driver hub[ 0.087975] usbcore: registered new device driver usb[ 0.089252] mc: Linux media interface: v0.10[ 0.089282] videodev: Linux video capture interface: v2.00[ 0.089345] pps_core: LinuxPPS API ver. 1 registered[ 0.089352] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.089363] PTP clock support registered[ 0.089503] EDAC MC: Ver: 3.0.0[ 0.090277] No BMan portals available![ 0.090488] QMan: Allocated lookup table at (____ptrval____), entry count 65537[ 0.090754] No QMan portals available![ 0.091152] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree[ 0.091560] FPGA manager framework[ 0.091653] Advanced Linux Sound Architecture Driver Initialized.[ 0.092200] Bluetooth: Core ver 2.22[ 0.092226] NET: Registered protocol family 31[ 0.092232] Bluetooth: HCI device and connection manager initialized[ 0.092245] Bluetooth: HCI socket layer initialized[ 0.092251] Bluetooth: L2CAP socket layer initialized[ 0.092264] Bluetooth: SCO socket layer initialized[ 0.092954] clocksource: Switched to clocksource arch_sys_counter[ 0.093126] VFS: Disk quotas dquot_6.6.0[ 0.093176] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[ 0.093320] pnp: PnP ACPI: disabled[ 0.098819] thermal_sys: Registered thermal governor 'step_wise'[ 0.098823] thermal_sys: Registered thermal governor 'power_allocator'[ 0.099148] NET: Registered protocol family 2[ 0.099450] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)[ 0.099481] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)[ 0.099590] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)[ 0.099816] TCP: Hash tables configured (established 16384 bind 16384)[ 0.099895] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)[ 0.099937] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)[ 0.100068] NET: Registered protocol family 1[ 0.100402] RPC: Registered named UNIX socket transport module.[ 0.100407] RPC: Registered udp transport module.[ 0.100411] RPC: Registered tcp transport module.[ 0.100415] RPC: Registered tcp NFSv4.1 backchannel transport module.[ 0.100788] PCI: CLS 0 bytes, default 64[ 0.101470] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available[ 0.101846] kvm [1]: IPA Size Limit: 40bits[ 0.102464] kvm [1]: GICv3: no GICV resource entry[ 0.102469] kvm [1]: disabling GICv2 emulation[ 0.102487] kvm [1]: GIC system register CPU interface enabled[ 0.102543] kvm [1]: vgic interrupt IRQ1[ 0.102627] kvm [1]: Hyp mode initialized successfully[ 0.105478] Initialise system trusted keyrings[ 0.105609] workingset: timestamp_bits=44 max_order=19 bucket_order=0[ 0.111688] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 0.112328] NFS: Registering the id_resolver key type[ 0.112351] Key type id_resolver registered[ 0.112356] Key type id_legacy registered[ 0.112367] nfs4filelayout_init: NFSv4 File Layout Driver Registering...[ 0.112385] jffs2: version 2.2. (NAND) \xc2\xa9 2001-2006 Red Hat, Inc.[ 0.112733] 9p: Installing v9fs 9p2000 file system support[ 0.126207] Key type asymmetric registered[ 0.126214] Asymmetric key parser 'x509' registered[ 0.126248] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)[ 0.126254] io scheduler mq-deadline registered[ 0.126261] io scheduler kyber registered[ 0.128871] gpio-control: GPIO major number243[ 0.132344] EINJ: ACPI disabled.[ 0.141398] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2[ 0.141411] imx-sdma 302c0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin[ 0.149873] mxs-dma 33000000.dma-controller: initialized[ 0.151178] Bus freq driver module loaded[ 0.151723] Board Info:[ 0.151729] BSP Version : iW-PRGPP-SC-01-R2.0-REL1.0-Linux5.4.70[ 0.151734] SOM Version : iW-PRFYZ-AP-01-R1.0[ 0.151737] CPU Unique ID : 0x131CB209DAB5FC2F[ 0.151796] Carrier Board Version : iW-PRGPP-01-R2.0[ 0.156810] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled[ 0.158957] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 36, base_baud = 5000000) is a IMX[ 0.159402] 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 37, base_baud = 1500000) is a IMX[ 0.159770] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 38, base_baud = 1500000) is a IMX[ 0.160151] 30a60000.serial: ttymxc3 at MMIO 0x30a60000 (irq = 43, base_baud = 1500000) is a IMX[ 1.302095] printk: console [ttymxc3] enabled[ 1.312512] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).[ 1.319155] [drm] No driver support for vblank timestamp query.[ 1.325148] imx-drm soc@0:bus@32c00000:display-subsystem: bound imx-lcdif-crtc.0 (ops lcdif_crtc_ops)[ 1.334472] [DEBUG] Inside sec_mipi_dsim_bind: sec-dsim bridge bind begin[ 1.341394] imx_sec_dsim_drv 32e10000.mipi_dsi: version number is 0x1060200[ 1.348402] [DEBUG] before drm_bridge_attach[ 1.352700] imx_sec_dsim_drv 32e10000.mipi_dsi: Failed to attach bridge: 32e10000.mipi_dsi[ 1.360975] imx_sec_dsim_drv 32e10000.mipi_dsi: failed to bind sec dsim bridge: -517[ 1.378467] loop: module loaded[ 1.383849] imx ahci driver is registered.[ 1.390756] spi_imx 30820000.spi: probed[ 1.395271] ------------[ cut here ]------------[ 1.399906] /soc@0/bus@30800000/spi@30830000/spi@0: buggy DT: spidev listed directly in DT[ 1.408227] WARNING: CPU: 1 PID: 1 at drivers/spi/spidev.c:736 spidev_probe+0x104/0x220[ 1.416229] Modules linked in:[ 1.419289] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.70+gfd7f722f444d #28[ 1.426510] Hardware name: iW-G39H-i.MX8MM-SODIMM-2GB (DT)[ 1.431996] pstate: 60000005 (nZCv daif -PAN -UAO)[ 1.436785] pc : spidev_probe+0x104/0x220[ 1.440793] lr : spidev_probe+0x104/0x220[ 1.444801] sp : ffff80001003b7c0[ 1.448114] x29: ffff80001003b7c0 x28: 0000000000000000 [ 1.453425] x27: ffff0000785a5800 x26: ffff800011ac7d50 [ 1.458738] x25: 0000000000000000 x24: 0000000000000000 [ 1.464050] x23: ffff800011ad82e8 x22: 0000000000000000 [ 1.469363] x21: ffff800011ad82c8 x20: ffff000076980800 [ 1.474676] x19: 0000000000000000 x18: 0000000000000010 [ 1.479988] x17: 0000000000000001 x16: 0000000000000019 [ 1.485301] x15: ffff0000780a0470 x14: 796c746365726964 [ 1.490613] x13: 2064657473696c20 x12: 766564697073203a [ 1.495926] x11: 5444207967677562 x10: 203a30406970732f [ 1.501239] x9 : 3030303033383033 x8 : ffff800011ba1000 [ 1.506550] x7 : ffff8000106a3828 x6 : 00000000000000d8 [ 1.511862] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.517174] x3 : 00000000ffffffff x2 : ffff800011a721c8 [ 1.522487] x1 : 72888a825a38d200 x0 : 0000000000000000 [ 1.527801] Call trace:[ 1.530250] spidev_probe+0x104/0x220[ 1.533912] spi_drv_probe+0x7c/0xd8[ 1.537491] really_probe+0xd4/0x318[ 1.541066] driver_probe_device+0x54/0xe8[ 1.545162] __device_attach_driver+0x80/0xb8[ 1.549521] bus_for_each_drv+0x74/0xc0[ 1.553356] __device_attach+0xe8/0x148[ 1.557192] device_initial_probe+0x10/0x18[ 1.561377] bus_probe_device+0x90/0x98[ 1.565214] device_add+0x378/0x648[ 1.568702] spi_add_device+0xf0/0x1d0[ 1.572451] of_register_spi_device+0x204/0x3c8[ 1.576982] spi_register_controller+0x43c/0x790[ 1.581600] spi_bitbang_start+0x34/0x80[ 1.585524] spi_imx_probe+0x448/0x6a8[ 1.589274] platform_drv_probe+0x50/0xa0[ 1.593282] really_probe+0xd4/0x318[ 1.596859] driver_probe_device+0x54/0xe8[ 1.600953] device_driver_attach+0x6c/0x78[ 1.605134] __driver_attach+0x54/0xd0[ 1.608884] bus_for_each_dev+0x6c/0xc0[ 1.612721] driver_attach+0x20/0x28[ 1.616295] bus_add_driver+0x140/0x1e8[ 1.620131] driver_register+0x60/0x110[ 1.623965] __platform_driver_register+0x44/0x50[ 1.628672] spi_imx_driver_init+0x1c/0x24[ 1.632770] do_one_initcall+0x50/0x1a8[ 1.636607] kernel_init_freeable+0x194/0x23c[ 1.640966] kernel_init+0x10/0x100[ 1.644456] ret_from_fork+0x10/0x1c[ 1.648035] ---[ end trace 3f1c3fd879b795c9 ]---[ 1.652811] spi_imx 30830000.spi: probed[ 1.657314] spi_imx 30840000.spi: probed[ 1.662801] libphy: Fixed MDIO Bus: probed[ 1.667658] tun: Universal TUN/TAP device driver, 1.6[ 1.672881] CAN device driver interface[ 1.787460] tcan4x5x spi0.0 (unnamed net_device) (uninitialized): Failed to init module[ 1.797356] random: fast init done[ 1.826072] tcan4x5x spi0.0: m_can device registered (irq=73, version=32)[ 1.832903] tcan4x5x spi0.0 can0: TCAN4X5X successfully initialized.[ 1.947376] tcan4x5x spi2.0 (unnamed net_device) (uninitialized): Failed to init module[ 1.999205] tcan4x5x spi2.0: m_can device registered (irq=82, version=32)[ 2.006006] tcan4x5x spi2.0 can1: TCAN4X5X successfully initialized.[ 2.013187] thunder_xcv, ver 1.0[ 2.016447] thunder_bgx, ver 1.0[ 2.019715] nicpf, ver 1.0[ 2.025310] pps pps0: new PPS source ptp0[ 2.034874] libphy: fec_enet_mii_bus: probed[ 2.040334] fec 30be0000.ethernet eth0: registered PHC device 0[ 2.046913] Freescale FM module, FMD API version 21.1.0[ 2.052412] Freescale FM Ports module[ 2.056085] fsl_mac: fsl_mac: FSL FMan MAC API based driver[ 2.061822] fsl_dpa: FSL DPAA Ethernet driver[ 2.066291] fsl_advanced: FSL DPAA Advanced drivers:[ 2.071261] fsl_proxy: FSL DPAA Proxy initialization driver[ 2.076958] fsl_oh: FSL FMan Offline Parsing port driver[ 2.083167] hclge is initializing[ 2.086493] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version[ 2.093719] hns3: Copyright (c) 2017 Huawei Corporation.[ 2.099085] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI[ 2.106139] e1000: Copyright (c) 1999-2006 Intel Corporation.[ 2.111922] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k[ 2.117762] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.[ 2.123717] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k[ 2.130685] igb: Copyright (c) 2007-2014 Intel Corporation.[ 2.136293] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k[ 2.144127] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.[ 2.150219] sky2: driver version 1.30[ 2.154620] usbcore: registered new interface driver cdc_ether[ 2.160726] VFIO - User Level meta-driver version: 0.3[ 2.167717] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 2.174307] ehci-pci: EHCI PCI platform driver[ 2.178793] ehci-platform: EHCI generic platform driver[ 2.184218] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 2.190420] ohci-pci: OHCI PCI platform driver[ 2.194904] ohci-platform: OHCI generic platform driver[ 2.200864] usbcore: registered new interface driver uas[ 2.206236] usbcore: registered new interface driver usb-storage[ 2.212315] usbcore: registered new interface driver usbserial_generic[ 2.218868] usbserial: USB Serial support registered for generic[ 2.224906] usbcore: registered new interface driver ftdi_sio[ 2.230671] usbserial: USB Serial support registered for FTDI USB Serial Device[ 2.238008] usbcore: registered new interface driver option[ 2.243605] usbserial: USB Serial support registered for GSM modem (1-port)[ 2.250597] usbcore: registered new interface driver usb_serial_simple[ 2.257150] usbserial: USB Serial support registered for carelink[ 2.263264] usbserial: USB Serial support registered for zio[ 2.268954] usbserial: USB Serial support registered for funsoft[ 2.274984] usbserial: USB Serial support registered for flashloader[ 2.281359] usbserial: USB Serial support registered for google[ 2.287295] usbserial: USB Serial support registered for libtransistor[ 2.293843] usbserial: USB Serial support registered for vivopay[ 2.299873] usbserial: USB Serial support registered for moto_modem[ 2.306165] usbserial: USB Serial support registered for motorola_tetra[ 2.312801] usbserial: USB Serial support registered for novatel_gps[ 2.319174] usbserial: USB Serial support registered for hp4x[ 2.324948] usbserial: USB Serial support registered for suunto[ 2.330888] usbserial: USB Serial support registered for siemens_mpi[ 2.337275] usbcore: registered new interface driver usb_ehset_test[ 2.345236] imx_usb 32e40000.usb: No over current polarity defined[ 2.351622] imx_usb 32e50000.usb: No over current polarity defined[ 2.358866] input: 30370000.snvs:snvs-powerkey as /devices/platform/soc@0/soc@0:bus@30000000/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0[ 2.372656] linc HYN:[LINE=2615] linc hyn is entering cst3xx_ts_init.[ 2.380918] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0[ 2.387222] i2c /dev entries driver[ 2.391411] mx6s-csi 32e20000.csi1_bridge: initialising[ 2.397221] mxc_mipi-csi 32e30000.mipi_csi: 32e30000.mipi_csi supply mipi-phy not found, using dummy regulator[ 2.407427] mxc_mipi-csi 32e30000.mipi_csi: mipi csi v4l2 device registered[ 2.414403] CSI: Registered sensor subdevice: mxc_mipi-csi.0[ 2.420084] mxc_mipi-csi 32e30000.mipi_csi: lanes: 2, hs_settle: 13, clk_settle: 2, wclk: 1, freq: 333000000[ 2.434140] imx2-wdt 30280000.watchdog: timeout 60 sec (nowayout=0)[ 2.440755] Bluetooth: HCI UART driver ver 2.3[ 2.445214] Bluetooth: HCI UART protocol H4 registered[ 2.450358] Bluetooth: HCI UART protocol BCSP registered[ 2.455692] Bluetooth: HCI UART protocol LL registered[ 2.460840] Bluetooth: HCI UART protocol ATH3K registered[ 2.466269] Bluetooth: HCI UART protocol Three-wire (H5) registered[ 2.472641] Bluetooth: HCI UART protocol Broadcom registered[ 2.478325] Bluetooth: HCI UART protocol QCA registered[ 2.485748] sdhci: Secure Digital Host Controller Interface driver[ 2.491946] sdhci: Copyright(c) Pierre Ossman[ 2.496514] Synopsys Designware Multimedia Card Interface Driver[ 2.503111] sdhci-pltfm: SDHCI platform and OF driver helper[ 2.509586] mmc2: CQHCI version 5.10[ 2.513236] sdhci-esdhc-imx 30b40000.mmc: allocated mmc-pwrseq[ 2.550762] mmc2: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA[ 2.558264] mmc1: CQHCI version 5.10[ 2.561937] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO[ 2.601102] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA[ 2.608756] mmc0: CQHCI version 5.10[ 2.613420] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)[ 2.623096] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)[ 2.633375] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)[ 2.645897] mmc0: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA[ 2.646831] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)[ 2.659406] ledtrig-cpu: registered to indicate activity on CPUs[ 2.664411] mmc2: queuing unknown CIS tuple 0x80 (6 bytes)[ 2.666883] caam 30900000.crypto: device ID = 0x0a16040100000000 (Era 9)[ 2.677681] caam 30900000.crypto: job rings = 3, qi = 0[ 2.711074] caam algorithms registered in /proc/crypto[ 2.720071] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto[ 2.727496] caam 30900000.crypto: registering rng-caam[ 2.734104] Device caam-keygen registered[ 2.741715] caam-snvs 30370000.caam-snvs: violation handlers armed - non-secure state[ 2.750267] usbcore: registered new interface driver usbhid[ 2.752766] mmc2: new ultra high speed SDR104 SDIO card at address 0001[ 2.755852] usbhid: USB HID core driver[ 2.757429] No fsl,qman node[ 2.757446] random: crng init done[ 2.772631] Freescale USDPAA process driver[ 2.776900] fsl-usdpaa: no region found[ 2.778407] mmc0: Command Queue Engine enabled[ 2.780779] Freescale USDPAA process IRQ driver[ 2.785226] mmc0: new HS400 Enhanced strobe MMC card at address 0001[ 2.794337] galcore: clk_get vg clock failed, disable vg![ 2.797159] mmcblk0: mmc0:0001 DG4008 7.28 GiB [ 2.801884] Galcore version 6.4.3.p1.305572[ 2.806175] mmcblk0boot0: mmc0:0001 DG4008 partition 1 4.00 MiB[ 2.816297] mmcblk0boot1: mmc0:0001 DG4008 partition 2 4.00 MiB[ 2.822979] mmcblk0rpmb: mmc0:0001 DG4008 partition 3 4.00 MiB, chardev (236:0)[ 2.833528] mmcblk0: p1 p2[ 2.887504] [drm] Initialized vivante 1.0.0 20170808 for 38000000.gpu on minor 0[ 2.896477] hantrodec 0 : module inserted. Major = 235[ 2.902163] hantrodec 1 : module inserted. Major = 235[ 2.908125] hx280enc: module inserted. Major [ 2.916404] simple card ---------asoc_simple_probe...........[ 2.963622] imx-spdif sound-spdif: snd-soc-dummy-dai 30090000.spdif mapping ok[ 2.971262] imx-spdif sound-spdif: ASoC: no DMI vendor name![ 2.980245] pktgen: Packet Generator for packet performance testing. Version: 2.75[ 2.992768] NET: Registered protocol family 26[ 2.997855] NET: Registered protocol family 10[ 3.002969] Segment Routing with IPv6[ 3.006707] NET: Registered protocol family 17[ 3.011167] can: controller area network core (rev 20170425 abi 9)[ 3.017394] NET: Registered protocol family 29[ 3.021847] can: raw protocol (rev 20170425)[ 3.026123] can: broadcast manager protocol (rev 20170425 t)[ 3.031792] can: netlink gateway (rev 20190810) max_hops=1[ 3.037871] Bluetooth: RFCOMM TTY layer initialized[ 3.042772] Bluetooth: RFCOMM socket layer initialized[ 3.047938] Bluetooth: RFCOMM ver 1.11[ 3.051700] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[ 3.057020] Bluetooth: BNEP filters: protocol multicast[ 3.062253] Bluetooth: BNEP socket layer initialized[ 3.067225] Bluetooth: HIDP (Human Interface Emulation) ver 1.2[ 3.073154] Bluetooth: HIDP socket layer initialized[ 3.078154] 8021q: 802.1Q VLAN Support v1.8[ 3.082358] lib80211: common routines for IEEE802.11 drivers[ 3.088023] lib80211_crypt: registered algorithm 'NULL'[ 3.088026] lib80211_crypt: registered algorithm 'WEP'[ 3.088029] lib80211_crypt: registered algorithm 'CCMP'[ 3.088031] lib80211_crypt: registered algorithm 'TKIP'[ 3.088120] 9pnet: Installing 9P2000 support[ 3.092438] tsn generic netlink module v1 init...[ 3.097211] Key type dns_resolver registered[ 3.102478] registered taskstats version 1[ 3.106589] Loading compiled-in X.509 certificates[ 3.124402] imx-rpmsg b8000000.rpmsg: assigned reserved memory node vdevbuffer@b8400000[ 3.153322] virtio_rpmsg_bus virtio0: rpmsg host is online[ 3.159111] usb_phy_generic usbphynop1: usbphynop1 supply vcc not found, using dummy regulator[ 3.167896] usb_phy_generic usbphynop2: usbphynop2 supply vcc not found, using dummy regulator[ 3.183622] pcf85363 0-0051: registered as rtc1[ 3.201821] ldo6: supplied by regulator-dummy[ 3.207299] i2c i2c-0: IMX I2C adapter registered[ 3.213482] TLV ..........aic31xx_i2c_probe............[ 3.219155] i2c i2c-1: IMX I2C adapter registered[ 3.225007] linc HYN:[LINE=2216] linc hyn is entering tpd_i2c_probe. [ 3.338431] linc HYN:[LINE=2297]linc cst3xx hyn i2c communication failed.[ 3.345337] hynitron-ts: probe of 2-001a failed with error -1[ 3.351405] ov5640_mipi 2-003c: No sensor pwdn pin available[ 3.357123] ov5640_mipi 2-003c: 2-003c supply DOVDD not found, using dummy regulator[ 3.364926] ov5640_mipi 2-003c: 2-003c supply DVDD not found, using dummy regulator[ 3.372628] ov5640_mipi 2-003c: 2-003c supply AVDD not found, using dummy regulator[ 3.380529] ov5640_mipi 2-003c: Read reg error: reg=300a[ 3.385850] ov5640_mipi 2-003c: Camera is not found[ 3.390890] i2c i2c-2: IMX I2C adapter registered[ 3.397911] imx6q-pcie 33800000.pcie: 33800000.pcie supply epdev_on not found, using dummy regulator[ 3.397958] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).[ 3.407347] imx6q-pcie 33800000.pcie: EXT REF_CLK is used!.[ 3.413723] [drm] No driver support for vblank timestamp query.[ 3.420161] imx6q-pcie 33800000.pcie: PCIe PLL locked after 20 us.[ 3.425289] imx-drm soc@0:bus@32c00000:display-subsystem: bound imx-lcdif-crtc.0 (ops lcdif_crtc_ops)[ 3.431447] imx6q-pcie 33800000.pcie: host bridge /soc@0/pcie@33800000 ranges:[ 3.440723] [DEBUG] Inside sec_mipi_dsim_bind: sec-dsim bridge bind begin[ 3.447899] imx6q-pcie 33800000.pcie: IO 0x1ff80000..0x1ff8ffff -> 0x00000000[ 3.454789] imx_sec_dsim_drv 32e10000.mipi_dsi: version number is 0x1060200[ 3.462074] imx6q-pcie 33800000.pcie: MEM 0x18000000..0x1fefffff -> 0x18000000[ 3.469062] [DEBUG] before drm_bridge_attach[ 3.480718] imx_sec_dsim_drv 32e10000.mipi_dsi: Failed to attach bridge: 32e10000.mipi_dsi[ 3.488992] imx_sec_dsim_drv 32e10000.mipi_dsi: failed to bind sec dsim bridge: -517[ 3.498121] imx_usb 32e40000.usb: No over current polarity defined[ 3.504378] imx_usb 32e40000.usb: 32e40000.usb supply vbus not found, using dummy regulator[ 3.516505] usbmisc_imx 32e40200.usbmisc: vbus is error[ 3.521767] usbmisc_imx 32e40200.usbmisc: Error occurs during detection: -22[ 3.530966] imx_usb 32e50000.usb: No over current polarity defined[ 3.537236] imx_usb 32e50000.usb: 32e50000.usb supply vbus not found, using dummy regulator[ 3.548469] ci_hdrc ci_hdrc.1: EHCI Host Controller[ 3.553376] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1[ 3.572961] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00[ 3.579461] hub 1-0:1.0: USB hub found[ 3.583245] hub 1-0:1.0: 1 port detected[ 3.589116] input: pwm-beeper as /devices/platform/pwm_beeper/input/input1[ 3.597066] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 2 mkt segment 2 supported-hw 0x4 0x4[ 3.609246] simple card ---------asoc_simple_probe...........[ 3.615253] TLV ..........aic31xx_codec_probe............[ 3.620759] TLV ..........aic31xx_add_controls............[ 3.626345] TLV ..........aic31xx_add_controls............2[ 3.632017] TLV ..........aic31xx_add_controls............4[ 3.637685] TLV ..........aic31xx_add_widgets............[ 3.643176] tlv codec type --- 8[ 3.646584] tlv widgets route --- 8[ 3.650273] TLV ..........aic31xx_codec_probe.....end.......[ 3.656049] debugfs: Directory '30050000.sai' with parent 'Audio Output' already present![ 3.664240] TLV ..........aic31xx_set_dai_sysclk............[ 3.669991] clk_id = 0, freq = 26000000, dir = 0[ 3.674610] TLV ----i= 0,mclk=12000000[ 3.674612] tlv aic31xx->p_div=2,freq=26000000[ 3.682891] TLV ----i= 1,mclk=12000000[ 3.682893] tlv aic31xx->p_div=2,freq=26000000[ 3.691181] TLV ----i= 2,mclk=12500000[ 3.691182] tlv aic31xx->p_div=2,freq=26000000[ 3.699470] TLV ----i= 3,mclk=13000000[ 3.699472] tlv aic31xx->p_div=2,freq=26000000[ 3.707757] TLV ..........aic31xx_set_dai_fmt............[ 3.713249] TLV ..........aic31xx_clock_master_routes............[ 3.719508] asoc-simple-card sound-tlv320dac31: tlv320dac31xx-hifi 30050000.sai mapping ok[ 3.728134] asoc-simple-card sound-tlv320dac31: ASoC: no DMI vendor name![ 3.735364] TLV..........aic31xx_set_bias_level............[ 3.740949] tlv value of level = 1 [ 3.744523] tlv value of snd_soc_component_get_bias_level(component)=0[ 3.751155] TLV ..........aic31xx_power_on............[ 3.757957] TLV..........aic31xx_reset............[ 3.762857] tlv ..........aic31xx_software reset............[ 3.905968] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).[ 3.912605] [drm] No driver support for vblank timestamp query.[ 3.918589] imx-drm soc@0:bus@32c00000:display-subsystem: bound imx-lcdif-crtc.0 (ops lcdif_crtc_ops)[ 3.925579] usb 1-1: new high-speed USB device number 2 using ci_hdrc[ 3.927894] [DEBUG] Inside sec_mipi_dsim_bind: sec-dsim bridge bind begin[ 3.941196] imx_sec_dsim_drv 32e10000.mipi_dsi: version number is 0x1060200[ 3.948211] [DEBUG] before drm_bridge_attach[ 3.952683] imx-drm soc@0:bus@32c00000:display-subsystem: bound 32e10000.mipi_dsi (ops imx_sec_dsim_ops)[ 3.962874] [drm] Initialized imx-drm 1.0.0 20120507 for soc@0:bus@32c00000:display-subsystem on minor 1[ 4.072886] lt8912 1-0048: "1280x800": 60 74202 1280 1350 1420 1490 800 810 820 830 0x48 0x5[ 4.073501] lt8912 1-0048: LT8912 ID: 12, b2[ 4.100278] hub 1-1:1.0: USB hub found[ 4.100659] hub 1-1:1.0: 4 ports detected[ 4.143668] Console: switching to colour frame buffer device 160x50[ 4.183815] imx-drm soc@0:bus@32c00000:display-subsystem: fb0: imx-drmdrmfb frame buffer device[ 4.194715] input: gpio-keys as /devices/platform/gpio-keys/input/input2[ 4.202659] input: bd718xx-pwrkey as /devices/platform/soc@0/soc@0:bus@30800000/30a20000.i2c/i2c-0/0-004b/gpio-keys.1.auto/input/input3[ 4.216138] pcf85363 0-0051: setting system clock to 2000-01-01T00:00:12 UTC (946684812)[ 4.224665] cfg80211: Loading compiled-in X.509 certificates for regulatory database[ 4.235427] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'[ 4.242025] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2[ 4.247252] ALSA device list:[ 4.250659] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db[ 4.253627] #0: imx-spdif[ 4.264160] #1: Audio Output[ 4.405342] usb 1-1.1: new high-speed USB device number 3 using ci_hdrc[ 4.469922] imx6q-pcie 33800000.pcie: Phy link never came up[ 4.475632] imx6q-pcie 33800000.pcie: failed to initialize host[ 4.481564] imx6q-pcie 33800000.pcie: unable to add pcie port.[ 4.531828] usb-storage 1-1.1:1.0: USB Mass Storage device detected[ 4.537010] EXT4-fs (mmcblk0p2): recovery complete[ 4.538824] scsi host0: usb-storage 1-1.1:1.0[ 4.543718] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)[ 4.555421] VFS: Mounted root (ext4 filesystem) on device 179:2.[ 4.564621] devtmpfs: mounted[ 4.568432] Freeing unused kernel memory: 2880K[ 4.573052] Run /sbin/init as init process[ 4.644109] systemd[1]: System time before build time, advancing clock.[ 4.662828] systemd[1]: systemd 243.2+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)[ 4.684805] systemd[1]: Detected architecture arm64.[ 4.725708] systemd[1]: Set hostname to .[ 4.855719] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly.[ 4.883317] systemd[1]: /lib/systemd/system/syslogd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/syslogd.pid \xe2\x86\x92 /run/syslogd.pid; please update the unit file accordingly.[ 4.911278] systemd[1]: /lib/systemd/system/rpcbind.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/rpcbind.sock \xe2\x86\x92 /run/rpcbind.sock; please update the unit file accordingly.[ 4.934436] systemd[1]: /lib/systemd/system/klogd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/klogd.pid \xe2\x86\x92 /run/klogd.pid; please update the unit file accordingly.[ 5.032713] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.[ 5.045110] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)[ 5.055454] systemd[1]: Created slice system-getty.slice.[ 5.463550] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)[ 5.570309] scsi 0:0:0:0: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0[ 5.581166] scsi 0:0:0:1: Direct-Access Multiple Flash Reader 1.05 PQ: 0 ANSI: 0[ 5.682972] systemd-journald[258]: Received client request to flush runtime journal.[ 5.956836] sd 0:0:0:1: [sdb] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)[ 5.967207] sd 0:0:0:0: [sda] Attached SCSI removable disk[ 5.974214] sd 0:0:0:1: [sdb] Write Protect is off[ 5.982004] sd 0:0:0:1: [sdb] Mode Sense: 03 00 00 00[ 5.982823] sd 0:0:0:1: [sdb] No Caching mode page found[ 5.991745] sd 0:0:0:1: [sdb] Assuming drive cache: write through[ 6.022885] sdb: sdb1 sdb2[ 6.033289] sd 0:0:0:1: [sdb] Attached SCSI removable disk[ 6.515451] imx-sdma 302b0000.dma-controller: loaded firmware 4.5[ 7.038898] Atheros 8031 ethernet 30be0000.ethernet-1:04: attached PHY driver [Atheros 8031 ethernet] (mii_bus:phy_addr=30be0000.ethernet-1:04, irq=POLL)[ 7.775999] audit: type=1006 audit(1640869463.128:2): pid=635 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1[ 8.436227] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) for reference. 2ff7e9595c
Comments